VW SPLITSCREEN STRAIGHT AXLE

Straight axle split kombi kit installed using original brakes and hand brake cables, non adjustable spring plates and can still get the wheels off without deflating or using two jacks ( still passes the 90mm rule in Queensland. personally I think it is the right height, any lower to me is ridiculous for a daily driver )

VW KOMBI FOLD AWAY TABLE

Fold away table I made for Kombi van

VW SPLITSCREEN GEARBOX JIG

Split screen gearbox and engine jig i finally got around to building. Setting up Pauls rear end using original split brakes.

JEEP LUGGAGE RACK

Luggage rack made from 25mm steel tube.                                                                                       

VW KOMBI ROOF SECTION

Just a little rust job

KOMBI SPLITWINDOW SAFARI WINDOWS

Fit new safari windows to Steves van

VW SUPERCHARGED 1200

Starting to do trial fit.
Cam dialed in, make
sure the counter weights
i welded on clear.Special
supercharged cam profiled
by Pete from Watson Cams

VW SPLITSCREEN STRAIGHT AXLE

The straight axle kits i make up

VW SPLITSCREEN SIDE PANELS

 Cut out and spot on new long side

 Cutting out the panel ready
for new one to be installed.

New panel spot welded in place

JUDSON SUPERCHARGER REBUILD

Start of my Judson supercharger
rebuild honed the centre and stripped
the outside ready for paint. waiting for
bearings and seals from the States.

Bearings and seals arrived

Some of the aluminium parts i polished,front and rear covers, pully and a mg belt tensioner that i'm using

Restored Marvel Oiler with new glass bottle

COUNTER WEIGHTED CRANKSHAFT

Counter weights are cut
and welded to crank.Then

knife edged on the lathe.
Preheated and arc welded
with special rods and slow
cooled over night in a leather
blanket.

Finished 1200 counter weighted crank, nitrited and ready for the "massive" 

boost from the Judson                                             

BEETLE FRAME HEAD REPAIR

 UNDERSIDE OF FRAME HEAD CUT OUT AND NEW ONE WELDED IN

SPLIT KOMBI DOOR REPAIR

INSIDE PART IS WELDED IN PLACE

FINISHED PRODUCT ( GERSON PANEL PRETTY GOOD FIT
BUT DID NEED TWEEKING ON THE INSIDE ONE )